JS01Y
Baoli
3506911000
| Quantity: | |
|---|---|
Product Description:
As the latest improvement of polyurea, polyaspartic coating features in slow curring time and uv-resistant. As we know, polyurea cures in seconds, so it need to be applied by high pressure spray machine thus not suitable for household decoration. But the curring time of polyaspartic coatings ranges from 30 minutes to several hours, so we can use it by brush, roller, or scraper. The moderated chemical structure of polyaspartic keeps stable under sunshine and won't be yellowing, keeps the flooring always vivid as new installed.
Performance parameters:
Solid Content ≥ 95%
Operation Time ≤ 40 minutes
Surface Dry Time ≤ 2 hours
Real Dry Time ≤ 12 hours
Tensile Strength ≥ 15 MPa
Elongation at Break ≥ 80%
Tear Strength ≥ 70 KN/M
Hardness Shore D ≥ 70
Adhesion to Concrete Surface ≥ 2. MPa
Impact Resistance ≥ 1 KG▪M
Wear Resistance [(750g/500r)] ≤ 20mg
Artificial Aging Resistance ≥ 800 hours
Scratch Resistance (Pencil Hardness) ≥ 2 hours
Install procedure as follows (please see video):
1. Base layer of colored polyaspartic (JS01R);
2. Apply the flakes, scrap it to be flat and sweep away the extra flakes;
3. Brush the transparent polyaspartic (JS01Y) and cover the flakes.
The polyaspartic coatings are two-component, so we need to mix the part A & B before applying. Once mixed, it should be used within 30 minutes when it's around 25℃. Polyaspartic cures faster if the temperature is high, if you need to construct in summer time, we have another model JS06Y which cures slower. Please find it in our website.
Product Description:
As the latest improvement of polyurea, polyaspartic coating features in slow curring time and uv-resistant. As we know, polyurea cures in seconds, so it need to be applied by high pressure spray machine thus not suitable for household decoration. But the curring time of polyaspartic coatings ranges from 30 minutes to several hours, so we can use it by brush, roller, or scraper. The moderated chemical structure of polyaspartic keeps stable under sunshine and won't be yellowing, keeps the flooring always vivid as new installed.
Performance parameters:
Solid Content ≥ 95%
Operation Time ≤ 40 minutes
Surface Dry Time ≤ 2 hours
Real Dry Time ≤ 12 hours
Tensile Strength ≥ 15 MPa
Elongation at Break ≥ 80%
Tear Strength ≥ 70 KN/M
Hardness Shore D ≥ 70
Adhesion to Concrete Surface ≥ 2. MPa
Impact Resistance ≥ 1 KG▪M
Wear Resistance [(750g/500r)] ≤ 20mg
Artificial Aging Resistance ≥ 800 hours
Scratch Resistance (Pencil Hardness) ≥ 2 hours
Install procedure as follows (please see video):
1. Base layer of colored polyaspartic (JS01R);
2. Apply the flakes, scrap it to be flat and sweep away the extra flakes;
3. Brush the transparent polyaspartic (JS01Y) and cover the flakes.
The polyaspartic coatings are two-component, so we need to mix the part A & B before applying. Once mixed, it should be used within 30 minutes when it's around 25℃. Polyaspartic cures faster if the temperature is high, if you need to construct in summer time, we have another model JS06Y which cures slower. Please find it in our website.
